Category

REDUCING ELBOW EQUAL TEE BEND CONC REDUCER BARRED TEE END CAP STUB END CROSS TEE ECC REDUCER LATERAL TEE 90 DEGREE ELBOW SR & LR RETURN BEND / U BEND

BLIND FLANGE LOOSE / LAP JOINT FLANGES WELDNECK NIPPO FLANGE LONG WELD NECK SPECTACLE FLANGE SLIP ON FLANGE THREADED FLANGE AWWA FLANGE SPACER&SPADDLE BLANK ORIFICE FLANGES SOCKET WELD FLANGES REDUCING FLANGE

ELBOW 45 DEGREE TEE UNION HALF & FULL COUPLING ELBOW 90 DEGREE CROSS

Round Bar HEX BAR ALLOY STEEL BARS FOR LOW TEMPERATURE ASTM A350 LF2 CARBON STEEL BAR ASTM A105 STAINLESS STEEL BARS ASTM A276/ ASTM A479 DUPLEX STEEL A276 ALLOY STEEL BAR EN8, EN19,EN24 &CK45 INCONEL 600 BAR ASTM B166 HASTELLOY BARS ASTM B574 SUPER DUPLEX BAR NICKEL 200-201 ROUND BAR TITANIUM BAR ASTM B861 ALLOY 20 BAR ASTM B473 COPPER NICKLE BARASTM B151 MONEL BAR ASTM B164

STAINLESS STEEL PLATE ASTM A240 ASTM B127 MONEL SHIM SHEETS HASTELLOY C276 BARS ASTM B575 INCONEL BARS ASTM B168 INCOLOY 800 ASTM B 409 ASTM B162 UNS N02200/UNS N02201 NICKEL SHIM SHEETS ASTM A240 UNS S32205 AND UNS S31803 Duplex Steel Chequered Plate ASTM A240 UNS S32750 AND UNS S32760 Shim Sheets, Super Duplex Steel S32760 ASTM B265 Titanium GR.2 AND GR,5 Shim Sheets Alloy Steel Cold Rolled Plates, ASTM A387 GR.11,GR.5, GR9 Alloy Steel Shim Sheets ASTM B463 UNS N08020 Alloy 20 Cold Rolled Plates ASTM B122 UNS C70600 CU NI 90/10 AND UNS C71500 CU NI 70/ 30 Copper Nickel Plate Carbon Steel Shim Sheets, ASTM A516 GR60 / GR.70 Carbon Steel Shim Sheets ASTM A240 UNS S31254, SMO 6Mo Plates Aluminium 5052 Coils, 6063 Sheets, Aluminium UNS A92014 Plates

INCOLOY 800 PIPES ASTM B407 "HASTELLOY C276 PIPES ASTM B622" "MONEL 400 PIPES ASTM B165" "TITANIUM & TITANIUM ALLOY PIPES & TUBES ASTM B861,B388,B862 " "ALLOY 20 PIPES ASTM B729" ALLOY STEEL PIPE FOR LOW TEMP i.e ASTM A333 SUPER DUPLEX STEEL PIPES ASTM A790 "COPPER NICKLE PIPES ASTM B111" ALLOY STEEL PIPES ASTM A335 P SERIES INCONEL 600 PIPES ASTM B517 Carbon Steel Pipes and Tubes ASTM A106/A53/ API 5L ALLOY STEEL PPES AND TUBES API 5L X52 PSL1 / X60 PSL 2/ X65 PSL1 / X 70 PSL2 "DUPLEX STEEL PIPES ASTM A790" STANLESS STEEL PIPES ASTM A312 /ASTM A358 "NICKLE 200-201 PIPES ASTM B161"

RING JOINT TYPE GASKETS SPIRAL WOUND GASKETS OCTOGONAL GASKETS INSULATION GASKET KIT GRAPHITE FILLER GASKETS

ERW Welded Steel Pipes

SYPHON (SY) CONDENSATE/ SEAL POT (CP) SNUBBER (SNB) FEMALE RUN TEE SWIVEL ADAPTOR Flanges QUICK RELEASE COUPLING AIR PRESSURE REGULATOR GAUGE COCKS MALE ELBOW 45 DEG MALE ELBOW 90 DEG FEMALE BRANCH TEE MALE CONNECTOR MALE TUBE ADAPTOR ELOBW UNION 90 DEG FEMALE BULKHEAD CONNECTOR FEMALE CONNECTOR PTFE TUBING/ FITTINGS/ VALVES FEMALE TUBE ADAPTOR UNION TUBE STRAIGHT MALE RUN TEE MALE BULKHEAD CONNECTOR MALE BRANCH TEE FEMALE ELBOW 90 DEG PIPE BUTT WELD CONNECTOR TEE UNION END CLOSURE FOR TUBE/ END CAP TEE FEMALE HEX ELBOW FEMALE HEX ELBOW MALE HEX HEX NIPPLE CROSS FEMALE HEX HEX COUPLING HEX PLUG TEE MALE HEX REDUCER TUBE CROSS UNION HEX CAP HEX ADAPTOR MALE X FEMALE END CLOSURE FOR FITTING SPARE NUT BULK HEAD UNION TUBE PIPE NIPPLE SPARE FERRULE SET HEX REDUCER ELBOW MALE FEMALE HEX PIPE COUPLING SCREWED PIPE TEE SCREWED/SW PIPE ELBOW SCREWED/SW PIPE COUPLING SOCKET WELD NEEDLE VALVE ANGLE PIPE UNION SCREWED/SW NEEDLE VALVE TUBE NEEDLE VALVE

Threaded Forged Fittings

Plates

We are suppling or exporting superior quality of Industrialstainless steel sheets, stainless steel plates, stainless steel coils in thickness of 0.3mm to 120mm. that have found extensive applications in various industries.

Product

Plates

(1 CUSTOMER REVIEW)

ITEM DESCRIPTION:

We are suppling or exporting superior quality of Industrialstainless steel sheets, stainless steel plates, stainless steel coils in thickness of 0.3mm to 120mm. that have found extensive applications in various industries. We also deal in Nickel and copper alloy, Stainless & Duplex Steel, Carbon & Alloy Steel, are the materials which are used for designing of stainless steel sheet, plate and coil. We offer various grades of stainless steel plates & Stainless Steel Sheets link SS 316 plates, SS 316L sheets &SS 304 plates etc.

TYPE:

Stainless Steel Plate, CS & MS Plate, Inconel, Copper, Duplex, Super Duplex, Alloy Steel etc.

METAL GRADE:

Stainless Steel:

ASTM A 240, SA 240, AISI 304, 304L, 304H, 310, 310S, 316, 316L, 316Ti, 317, 317L, 321, 321H

Carbon Steel:

ASTM A 515, A 516 Grade: 60, 70 B 2062

Alloy Steel:

ASTM A 387, Class: I/II, Grade: 11, 22, 5, 9, 12, 1

Nickel Alloys:

B162, B127, B463, B576, B168, B443

Copper Alloys:

Aluminium, Copper, Brass & Gunmetal

DIMENSION STANDARD:

SIZE:

1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm

THICKNESS:

0.3mm to 120mm

SHEET FINISHING:

2B, 2D, HR, CR, BA (No. 8), Satin (Met with PVC Coated)

SHEET & PLATE IN FORM OFShim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Etc.

Related Products

Plates

STAINLESS STEEL PLATE ASTM A240

RAW matNfab is one of the prominent trader, dealer and supplier of ASTM A240 SS Sheets Plates Coils, which is available at best prices for our customers. The impact energy varies according to product type and production route, whereas the impact strength of welded on these Stainless Steel Plates is slightly less than that of parent metal. Prolonged exposure to the 1100 Degree F – 1600 Degree F temperature range in our Stainless Steel Coils will cause some sigma to form, lowering room temperature ductility and impact resistance.

Plates

ASTM B127 MONEL SHIM SHEETS

WE RAW matNfab offers a widespread range of ASTM B127 UNS N04400 Monel 400 Alloy Sheets Plates and Coils, which has some outstanding features to offer such as durable, fine finish, accurate dimensions and so on. Also, our crew members make it a point to inspect these Monel Sheets on severe quality limits in order to be sure of their faultless toughness.

Plates

HASTELLOY C276 BARS ASTM B575

RAW matNFAB has an outstanding range of ASTM B575 UNS N10276 Hastelloy Alloy C276 Sheets Plates Coils, which is an anti – galling stainless steel that has excellent wear resistance. Hastelloy C276 Plates has outstanding resistance to pitting, oxidizing and stress – corrosion cracking environments up to 1900 Degree F. Hastelloy C276 Coils have outstanding resistance to pitting, stress corrosion and crevice corrosion cracking. Hastelloy C276 Slatting Coils has excellent machinability, though the alloy work toughens as is correct of the nickel base alloys overall.

Plates

INCONEL BARS ASTM B168

RAW matNfab offers an extensive collection of ASTM B168 UNS N06600/ UNS N06601 Sheets, Plates and Coils in different dimensions and sizes, where we as well offer the same at best possible rates. These Inconel 600/601 Sheets has outstanding corrosion by soaring-purity water, together with caustic corrosion. Our Inconel 600/601 Plates has suitable resistance to dry HCl and Cl2 gases at reasonably high temperatures.

Plates

INCOLOY 800 ASTM B 409

RAW matNfab offers an extensive quality collection of ASTM B409 UNS N08810 / UNS N08811 Alloy 800 / 800H / 800HT Sheets Plates and Coils. Incoloy 800 Sheets is a nickel – iron – chromium alloy by means of good resistance to oxidation, carburization at high temperatures and moderate strength. In power generation, re – heater and super – heater tubing has engaged these Incoloy 800 Plates.

Plates

ASTM B162 UNS N02200/UNS N02201 NICKEL SHIM SHEETS

RAW matNfab supplies, trades and manufactures an extensive variety of ASTM B162 UNS N02200 AND UNS N02201 Nickel Alloy Sheets, Plates and Coils to the well – regarded customers. These Nickel Plates also has some exceptional features to offer such as fine finish, precise in dimensions, rough construction, and so on.